Saturday, October 28, 2017

Tips on How to Clean Up Disk Space in Windows

A few years ago, the storage capacities of hard drives were limited. At present, hard drives have improved and can already hold a lot of files. In fact, hard drives continue to get bigger due to the advancements in technology. Then again, despite such improvements, hard drives still seem to lack space. Users just do not seem to have enough space for all their files and programs.

If you use your computer often, you may have a similar problem. This is especially true if you have an SSD or solid-state drive, which is much smaller than a traditional mechanical hard drive. Anyway, there is no need for you to buy a new computer. These tips on how to clean up disk space in Windows should help you solve your hard drive problems:

* Run a disk cleanup. Your Windows operating system includes several built-in tools. One of these is the Disk Cleanup, which can delete unimportant data and temporary files. To run it, just right-click on your hard drive and choose Properties. Then, click on Disk Cleanup and choose the files that you want to delete. It is recommended that you get rid of temporary files, recycle bin files, and log files. Press OK and you are done.

* If you want to remove your system files, just click on Clean Up System Files. Take note that system files usually do not appear on the list of files. Then, click on More Options and choose Clean Up to delete your system restore data. Remember that this button removes everything except the most recent restore point. Hence, you need to make sure that your computer is properly working before you use this function. Otherwise, you will no longer be able to use system restore points that are older.

* Remove applications that take up a lot of space. When you uninstall some of your programs, you will be able to have more free space. However, there are programs that do not really use a lot of space. So if you want to free up a lot of space, you should choose programs that use a lot of them. Go to your Control Panel and check out Programs and Features. Then, select Size to find out how much space your programs are using. If you cannot find Size, click on Options at the top right corner and choose Details.

* Analyze how much disk space you have. You can download a hard disk analysis software program to scan your hard drive and find out which of your folders and files take up the most space. See to it that you do not accidentally delete vital system files. Just delete your personal data files. You can also view Program Files and uninstall the programs that take up a lot of space. Sometimes, the size of space that programs use is not displayed in Programs and Features. This is why you should get a tool that displays exactly how much space your programs are using.

* Delete temporary files. You cannot delete temporary files using Disk Cleanup. Google Chrome and Mozilla Firefox browser caches, for instance, cannot be cleared and they can take up a lot of your hard disk space. So in order to get rid of temporary files, you need to use a registry cleaner. A software program like this is useful in removing junk files and preventing "DLL, SYS, and EXE" errors.

* Scan for duplicate files and delete them. You can use a special application to search your hard drive for unnecessary duplicate files. If you want to have more free space, you should remove the files that clutter up your hard drive.

* Reduce the space you use for System Restore. This can reduce your restore points and copies of files to restore, but it can free up a lot of disk space. Then again, you may only want to do this method if these features are not as important to you as the hard disk space that they use.

* Disable System Restore. If you feel that reducing the space you use for System Restore is not enough, you can disable the feature completely. Just keep in mind that doing so will no longer allow you to restore your system to a previous state.

* Disable Hibernation. Each time you hibernate your computer, the data of your RAM are saved in your hard drive, particularly in the C:hiberfil.sys file. Because of this, its system state is saved without having to use power and you are able to access your data immediately when you open your computer. If you disable hibernation, you will remove such file and free up some disk space.

These tips on how to clean up disk space in Windows are easy and useful. However, disabling System Restore and Hibernation are not ideal unless you are in desperate need of disk space. Also, make sure that you review your files before you delete them.

 

Secure Data Destruction: 4 Ways To Destroy A Hard Drive



Are you looking for ways on how to destroy your hard drive? Here are some of them:

Burning

While heat won't destroy data it will aid in turning your platters into liquid piles. There are a number of ways on how to burn the device. One of the ways is by using fire. This can be in the fireplace or hobo barrel. All you need to do is to toss the device in the fire and then leave it there for some time.

Another way is by using a blow torch. Here you need to put on some protective gear, hold the platter at distance and watch it melt.

If you are an adventurous hard drive destroyer, you can use a thermite. You should fill a large container with sand and then place the platter on the sand. You should then light a container of thermite over the platter. This technique produces a lot of heat that destroys the hard drive.

You can also use sugar and saltpeter. You should mix sugar and saltpeter in a soda can and place it over the hard disk.

While burning will destroy the device, you should be careful. For example, you should avoid doing the technique indoors as it tends to produce fumes that are harmful. The technique is also dangerous because sometimes there are explosions that can be harmful.

Hammering

This is the probably the fastest and most direct way of destroying the platter. You need to place the hard drive on a hard surface and then hit it with a hammer. You should ensure that you wear protective gear. For example, you should wear goggles and safety gloves.

You should also ensure that you are the only person in the room. This is to avoid hurting anyone with flying bits of glass and metal.

Magnetizing

You need to use giant magnets. If you have money you can buy the magnets; however, if you don't have money you should take your drive to a local junk or scrap yard. The good side with this technique is that it not only aids in destroying the drive, but it also ensures that all the data is erased.

Shredding

There are many industries with shredders that you can use and all you need to do is to rent some time with it and destroy your drive. There are also some companies that have shredders that are specifically designed to destroy hard drives. All you need to do is to visit these companies and ask them to destroy the device on your behalf.




We provide secure data destruction services that ensure that your data is safe and can't be accessed by anyone. One of the best services we provide is hard drive shredding services. To know more visit our website now.

Wednesday, October 4, 2017

When To Save Big On Cable Assemblies - And When To Splurge

Everyday, we are greeted by the comings and goings of materials that allow life to move forward. From the simplest diodes inside of computers to the massive cranes that aid in construction projects, plus the cable assemblies that allow power or data to flow efficiently, we see how various materials make our world run. Lost in the mix of all of this has to be the purchasing department of any business that deals with industries require any number of parts and pieces to operate.

For all intents and purposes, let's focus on cable assemblies. Again, they transit power or information from one place to another. Look at the inside of a computer, factory machinery, hospital equipment, or car, and you'll certainly encounter a cable assembly of some kind. When you have been given the responsibility to order cable assemblies for your company, it is hard to not be a bit unsure of what to do. That is if you've never done it before. Even if you do have experience with ordering cable assemblies, you are aware that there are things that can make every order a little different.

Regardless if you're a newbie to cable assemblies or not, you can take a cursory look at them and deduce that the materials involved in their construction don't seem like they cost too much. However, it's important to know that not all cable assemblies are built the same way. In fact, much of the work involved is customized to a particular customer operating in a specific industry. Given the importance of these items, is it right to be considering the cost when ordering?

There are a few ways to approach the issue. If you want to save money, consider the following:

Look Over Project Specs & Bill of Materials - Working with a trusted, respected manufacturer makes it easier to look over what materials you need for your order. The manufacturer will be able to provide options as to where certain materials can be used to still accomplish the same tasks & reach the same goals but be easier on your budget.

Have A Better Understanding of the Project - This goes hand-in-hand with looking over materials. By knowing what the cable assemblies are for, both you and the manufacturer can work together to explore options for your business. You may even have some better insight as to how to assess your current needs and see how they may change in the future.

However, while saving money can make you a hero, you also need to know when it's best to actually splurge on cable assemblies. Actually, it might be best to note that the word 'splurge' may not be the best choice of words because it implies you're doing more than would be necessary. That's not the case here, but if we're to use 'splurge', you'd want to spend accordingly if the specs of a project call for certain materials. There is no room for substitutions, and even with a better understanding of the project, everyone involved understands that getting the job done requires the right materials.